BASSBOSS Coverage Guide


Amped, Austin

“Where do I put my subs in this room?” I had someone ask me a while ago, and not for the first time… Here is part of my answer:

Having subs apart from each other will cause interference patterns.  Because of energy loss over distance, the further the stacks are apart, the less noticeable the nulls will be, but there will be nulls.  The nulls happen wherever you are 1.5X further from one stack than the other.  In other words, in a straight line, you would have a peak half way between the two stacks and a null half way between that center point and each stack.

If you’re standing 20′ directly in front of one stack and the other stack is 30′ away on a diagonal, you will be in a null. In certain places, delaying of the arrays can be used to manipulate where the hot spots and nulls fall in the room. It can be useful to place nulls at exterior doorways or in DJ booths for instance. Some of the nulling may also be affected by wall and ceiling reflections.* (see note below)

Whenever you have multiple subwoofer locations, there will places in the room where the energy from the farther array will be nulling a good portion of the energy from the nearer array.  In short, to get the most even coverage its most often better to drop one big rock in the pond and make one big wave than it is to drop more small ones around the pond making more random ripples.

Putting all the bass on one end of a room will give you multiple advantages.  The first is that you’ll create one big wave rather than a bunch of smaller ones interfering with each other.

The second is coupling efficiency.  You get effectively twice as much output from two speakers coupled together than you do from two that are spaced apart.

Third, you get improved directional control of lower and lower frequencies the larger the array of cabinets is.  This effectively increases the system’s low frequency efficiency in front of the array while also reducing the energy being lost off-axis, where you might not want it to go.

Fourth, you also create a condition of 1/4 space loading for the cabinets, extending their low frequency response.  If the room isn’t too big, this effect can create a condition where the room dimensions are smaller than the wavelengths and you get rising response (room gain) at the extremely low end of the spectrum.

Finally, you increase the near-field listening distance with a large array, which means you lose less energy over the initial distance from the array with a bigger array.  This all means that the sound level on the dance floor would be quite consistent even if the subs were all on one end.  (Provided they aren’t all facing at a wall on the opposite edge of the dance floor.) (*see note below.)

I imagine that by now you will have guessed that I would recommend putting all your sub boxes at one end of the dance floor.  Under most circumstances, setting up the subs that way and using the right processor settings should give you massive extended low frequency response throughout the room. Adding appropriately capable top boxes with the right alignments will complete the high impact punch and deliver the best possible coverage for the space.


LA88 Dual 8-inch small format Powered LINE ARRAY contains big features and outstanding performance. Delivering a remarkable combination of flat frequency response, high output, broad coverage and long throw, the LA88 offers an extraordinarily powerful and versatile tool for the professional who needs high-quality sound with outstanding audience coverage.


DV8 long-throw convertible Powered MICROMAIN Flat frequency response, high output,very broad coverage and long throw, in a super-compact, lightweight and visually attractive package. A pair of the ultra high-fidelity DV8s can convert into a column array, offering line-array performance for just a small fraction of the cost. The mobile DJ’s dream top.



Sold Out