JBL CSS-H15 15W Weather Resistant Paging Horn
$77.52 USD
ADD TO CART

JBL CSS-H15 15W Weather Resistant Paging Horn


✅  In Stock and Ready To Ship 

✅  FREE Ground Shipping 

The JBL CSS-H15 paging horn is a cost-effective CSS Commercial Solutions Speaker, designed for the needs of a wide range of commercial applications. 

Designed for demanding environmental conditions, the CSS-H15 is highly weather resistant (IP-65 rated) so it can be used in either indoor or outdoor applications. The wide coverage pattern allows the horn to cover a larger audience area than is the case with many paging horns.

Constructed of sturdy ABS with corrosion‐resistant all-stainless-steel mounting bracket and hardware, this paging horn includes a built‐in UL registered multi‐tap transformer (15‐Watt) for use with 70V and 100V distributed speaker lines, with a screwdriver adjustable tap switch, and a bypass position for direct 8-ohm operation.

  • Excellent voice range clarity for announcement and paging
  • High sensitivity delivers high sound levels with minimal power amplification
  • Wide 70° horizontal by 90° vertical coverage for medium throw applications
  • Phenolic diaphragm driver for outdoor durability and high reliability
  • UL-registered 15-watt multi-tap transformer, with 8 ohm direct bypass
  • Built-in high-pass filter enhances reliability by protecting against low frequency damage
  • Highly weather-resistant, with stainless steel bracket and hardware
Frequency Response (-10 dB) 400 Hz – 7.5 kHz
Coverage Pattern 70° Horizontal by 90° Vertical (at 2 kHz and Averaged 1 kHz – 4 kHz)
Included High-Pass Filter Passive 350 Hz High-Pass Filter Built-in
Directivity Factor (Q) 10.9 (2 kHz)
Directivity Index (DI) 10.4 (2 kHz)
System Power Rating 15 W (60 W peak), 100 Hours
Sensitivity (1W, 2.83V@ 1m) 05 dB, Ave. 1 kHz – 6 kHz; 111 dB at 2 kHz
Maximum SPL (1m) 117 dB cont ave. (123 dB peak), 1 kHz – 6 kHz
123 dB cont ave. (129 dB peak), 2 kHz, 15W input
8 ohm setting
Nominal Impedance 15W/70V, NC/100V tap: 333 ohms
7.5W/70V, 15W/100V tap: 667 ohms
3.8W/70V, 7.5W/100V tap: 1333 ohms
1.9W/70V, 3.8W/100V tap: 2666 ohms
0.9W/100V, 1.9W/100V tap:5332 ohms
8 ohms at 8 ohm direct setting
Transformer Taps 70V: 15W, 7.5W, 3.8W, 1.9W. 0.9W
100V: 15W, 7.5W, 3.8W, 1.9W
Full-Range Driver 1.3" Diameter with Phenolic Diaphragm
Horn Material ABS
Mounting Hardware Stainless Steel Powder-Coated U-bracket (yolk) with 3 x 0.34" Diameter Mounting Holes
Color RAL9016 (Horn and Bracket)
Input Connection 12" Pigtail to Bare Wire; Entrance Via Watertight Fitting
Environmental IP-65 Rating Per IEC529, Salt Spray Per B117, Stainless Steel U-bracket and Exterior Hardware
Safety Agency Ratings Transformer UL Registered per UL1876
Dimensions (H x W x D) 6.5" (163 mm) x 8.8" (222 mm) x 9.2" (232 mm)
Weight 3 lbs (1.36 kg)
Shipping Weight 3.7 lbs (1.68 kg)

 


Share this Product


More from this collection